2 Inch Lowering Control Arm 2WD/4WD (Passenger Side)

Passenger Side Only – Packaged Individually
All-Steel Ball Joint, Performance Urethane Bushings & Twin-Tube Pivot Sleeves Pre-Installed

---

Lower Your 2014 Ford F-150 the Right Way — With Proper Geometry, Ride Quality, and Long-Term Reliability

If you want to give your 2014 Ford F-150 a cleaner stance, sharper handling, and a true sport-truck look without sacrificing ride comfort, alignment integrity, or component life, the 2 Inch Lowering Control Arm 2WD/4WD (Passenger Side) is the correct solution.

This precision-engineered lowering control arm delivers a true 2-inch front drop while maintaining proper suspension geometry, safe ball-joint angles, and factory-like alignment adjustability. Unlike shortcut lowering methods that rely on cut coils, drop springs, or geometry-compromising spindles, this control arm repositions the suspension pickup points correctly so your F-150 sits lower without introducing harsh ride quality, clearance problems, or accelerated tire wear.

Designed specifically for the 2014 Ford F-150 (2WD and 4WD), this passenger-side only control arm is a direct bolt-in replacement that installs cleanly and provides OEM-level durability with performance-grade components already installed.

Important Notes:
• Fits 2014 Ford F-150 2WD & 4WD
• Passenger Side Only
• Sold Individually
• Driver-side control arm sold separately - CLICK HERE for Driver Side Lowering Control Arm
• All-steel ball joint, urethane bushings, and twin-tube pivot sleeves included & pre-installed

---

Vehicle Fitment

Fits:
• 2014 Ford F-150

Drivetrain Compatibility:
• 2WD
• 4WD

Position:
• Passenger Side Only

Drop Height:
• 2 Inches Front

---

 Why Lowering Control Arms Are the Correct Way to Drop a 2014 F-150

The front suspension geometry on the 2014 Ford F-150 is extremely sensitive to control arm angle, ball-joint location, camber curve, and caster recovery.

When the front end is lowered using only shorter springs, coilovers, or cut coils—without correcting the control arm geometry—the suspension is forced to operate outside its intended range. This creates a long list of problems:

• Excessive negative camber
• Poor caster recovery
• Increased ball-joint stress
• Reduced suspension travel
• Tire-to-fender interference
• Coil and strut binding
• Harsh ride quality
• Rapid tire wear
• Unstable highway tracking

This is exactly why properly designed lowering control arms are essential for any lowered 2014 F-150 that’s driven on real roads.

---

Engineered for a True 2-Inch Front Drop

This passenger-side lowering control arm is engineered to reposition the ball-joint and pivot geometry to achieve a true 2-inch front drop while keeping suspension travel, steering behavior, and alignment range within safe operating limits.

Geometry Correction Benefits:

• Restores proper camber curve
• Maintains correct caster angle
• Keeps ball-joint angles in a safe operating range
• Preserves factory alignment adjustability
• Prevents tire-to-fender interference
• Eliminates strut and spring binding
• Improves steering stability and tracking

The result is a lowered F-150 that drives straight, corners predictably, and feels stable at highway speeds—without the twitchy, worn-out feel common with improperly lowered front suspensions.

---

Works on Both 2WD and 4WD F-150s

Unlike many lowering solutions that only work on two-wheel-drive trucks, this control arm is engineered to work on both 2WD and 4WD 2014 Ford F-150s.

That makes it a versatile solution whether you’re building:

• A mild daily-driver drop
• A slammed street truck
• A sport-handling F-150
• A show-quality build
• A performance street truck

No matter the drivetrain, this arm delivers the same corrected geometry, proper drop height, and long-term reliability.

---

Fully Assembled With Premium Components Installed

Every control arm ships fully assembled with premium performance components already installed. This eliminates the need for bushing presses, specialty tools, or additional parts.

Pre-Installed Components:

✔ All-Steel Heavy-Duty Ball Joint
Unlike factory composite or lightweight ball joints, this all-steel ball joint is engineered to handle altered suspension angles while maintaining smooth articulation and long service life.

✔ Performance Urethane Bushings
Urethane bushings dramatically reduce bushing deflection under braking and cornering, sharpen steering response, and last significantly longer than factory rubber bushings.

✔ Twin-Tube Pivot Sleeves
Twin-tube sleeves prevent bushing distortion, ensure proper torque retention, and provide a stable, durable pivot point under load.

This means:

• No pressing bushings
• No specialty tools
• No guesswork
• Faster installation
• Guaranteed component compatibility

---

Direct Bolt-On Installation

This passenger-side lowering control arm is designed as a direct OEM-style replacement for the factory control arm.

Installation Highlights:

• Bolts into factory mounting points
• No cutting or welding
• No drilling
• No frame modifications
• Compatible with factory springs and struts
• Works with common 2-inch rear drop setups
• Accepts standard alignment procedures

Once installed, your truck can be aligned using factory cam bolts and adjustment points.

---

Retains Factory Ride Quality

One of the biggest advantages of this 2-inch lowering control arm is that it retains factory springs and struts, preserving ride quality and suspension travel.

That means:

• Factory ride comfort is preserved
• No harsh spring rates
• No coil binding
• No bottoming out
• No loss of shock travel
• No excessive NVH (noise, vibration, harshness)

This makes it an ideal solution for:

• Daily-driven F-150s
• Long-distance highway trucks
• Street performance builds
• Show trucks that still get driven
• Owners who want stance without sacrificing comfort

---

Eliminates Clearance Issues

Factory control arms were never designed to operate at lowered ride heights. When dropped without geometry correction, stock arms often contact:

• The frame
• The strut body
• The coil spring
• The wheel or tire
• The sway bar

This 2-inch lowering control arm eliminates those interference points by repositioning the ball-joint and pivot geometry correctly.

Clearance Benefits:

• No metal-to-metal contact
• No spring rub
• No strut interference
• No tire scuffing
• No binding during compression

---

Built for Strength, Durability, and Daily Use

This is not a thin, stamped aftermarket arm. It’s a heavy-duty, precision-built suspension component designed to survive real-world abuse.

Construction Features:

• Heavy-gauge steel construction
• Reinforced stress points
• Precision-welded seams
• Corrosion-resistant coating
• High-strength ball-joint housing
• Oversized pivot sleeves

It’s built to meet or exceed OEM durability standards while delivering corrected geometry for a lowered suspension.

---

Ideal Rear Drop Pairings

For a clean, level stance or mild rake, pair this 2-inch front drop with one of the following rear drop options:

• 2" rear lowering shackles
• 3" rear lowering shackles
• 3" rear hanger & shackle kits
• 4" rear flip kits (mild street stance)

---

Product Specifications

• Application: 2014 Ford F-150
• Drivetrain: 2WD & 4WD
• Position: Passenger Side
• Drop: 2 Inches
• Material: Heavy-Duty Steel
• Finish: Corrosion-Resistant Coating
• Ball Joint: All-Steel, Pre-Installed
• Bushings: Performance Urethane (Pre-Installed)
• Pivot Sleeves: Twin-Tube (Pre-Installed)
• Installation: Direct Bolt-On
• Packaging: Sold Individually

---

Who This Control Arm Is Perfect For

This passenger-side lowering control arm is ideal for:

• F-150 owners who want a mild, clean drop
• Daily-driven street trucks
• Show trucks
• Performance-oriented builds
• Trucks running larger wheels
• Owners tired of tire wear from bad geometry
• Anyone seeking OEM-like reliability after lowering

---

Installation Notes & Alignment Recommendation

Professional installation is recommended but not required. Any competent shop familiar with front suspension work can install this control arm using standard tools.

Post-Installation Steps:

1. Install both driver and passenger side control arms

2. Torque all hardware to factory specs

3. Verify bushing preload with suspension at ride height

4. Perform a full four-wheel alignment

Alignment is mandatory after installation to ensure proper tire wear and steering response.

---

Why Buy from Gauge-Store?

At Gauge-Store, we specialize in suspension systems that are proven to work in the real world.

We don’t sell gimmicks or geometry-destroying lowering parts. We sell suspension components that:

• Fit correctly
• Install cleanly
• Drive properly
• Last long-term
• Deliver the stance your truck deserves

---

Final Thoughts

The 2014 Ford F-150 – 2 Inch Lowering Control Arm 2WD/4WD (Passenger Side) is the correct way to lower the front of your truck without sacrificing ride quality, alignment, or component life.

If you want:

• A true 2-inch drop
• Factory-like ride comfort
• Proper suspension geometry
• Long-term reliability
• Clean wheel fitment
• Zero clearance issues

—this control arm delivers exactly that.

Pair it with the matching driver-side arm and a quality rear drop setup, and your 2014 F-150 will sit right, drive right, and turn heads everywhere you go.