2010-2013 Dodge/Ram 2500/3500 4WD | 5 IN Coil Spring Lift Kit

Upgrade your 2010-2013 Dodge/Ram 2500/3500 4WD with Zone Offroad's 5 IN Coil Spring Lift Kit. Our high-quality lift kit is designed to provide the extra clearance you need for larger tires, while maintaining excellent on-road handling and off-road capabilities. The kit includes everything you need for an easy installation, including detailed instructions and all necessary hardware. Plus, our limited lifetime warranty ensures that you can trust the durability and longevity of our products. Don't settle for a stock ride, take your Dodge/Ram 2500/3500 to the next level with Zone Offroad's 5 IN Coil Spring Lift Kit. Shop now and experience the difference.

CHECK YOUR VEHICLE FITMENT !!

• 2010 Dodge Ram 2500 4WD
• 2010 Dodge Ram 3500 4WD
• 2011-2013 Ram 2500 4WD
• 2011-2012 Ram 3500 4WD

Features:

100% bolt-on design for easy installation.
Bump stop extensions properly limit up-travel, protecting your vehicle.
Heavy-duty upper and lower control arms improve strength and articulation while correcting caster.
Heavy-duty front track bar bracket correctly positions front axle under vehicle.
Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.

Overview:

Front Lift Height - 5"
Rear Lift Height - 3"
Front Lift Method - Coil Springs
Rear Lift Method - Cast Blocks
Lift Type - Lift Kit
Wheel Size - 17 x 9
Back Spacing - 5"
Max Tire Size - 35 x 12.5
Wheel Size 2 - 18 x 9
Back Spacing 2 - 5"
Max Tire Size 2 - 35 x 12.5
Wheel Size 3 - 20 x 9
Back Spacing 3 - 5"
Max Tire Size 3 - 35 x 12.5
Finish - Powdercoat
Cutting Required - No
Accommodates Factory Wheels - See Notes
Welding Required - No

In The Box:

All Necessary Mounting / Installation Hardware
Bump Stop Extensions
Coil Springs
Control Arms
Dropped Pitman Arm
Rear Lift Block & U-Bolt Kit
Sway Bar Relocation Brackets
Track Bar Relocation Bracket

IMPORTANT

• Will work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2” taller ride height, so net lift gain will be 3” over stock.
• Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
• Factory wheels fit when paired with factory / original equipment tire size.
• Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
• Gas Engine? Gas models may sit slightly taller than the advertised lift height due to lighter weight of engine.
• Lift Block Selection: These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory front-to-back ride height and order the rear lift height to achieve the desired stance. If closer to 1" tail high from the factory order the 5" rear coils for a more level stance. If closer to 3" tail high from the factory order the 3" rear coils for a more level stance.
• This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.