2007–2018 Chevy/GMC Silverado/Sierra 1500 – 3 Inch Rear Lowering Kit

If you own a 2007–2018 Chevy Silverado 1500 or GMC Sierra 1500 and want a clean, aggressive stance without complicated modifications, our 3 Inch Rear Lowering Kit is the ideal solution. This kit delivers a true 3-inch rear drop without flipping the axle, cutting the frame, or welding. Designed for simplicity, durability, and factory-quality fitment, it’s perfect for leveling your truck or pairing with a front lowering kit for a complete suspension upgrade.

Order yours today: 2007–2018 Chevy/GMC Silverado/Sierra 1500 – 3 Inch Rear Lowering Kit

Why Choose This 3 Inch Rear Drop Kit?

Many truck owners want to bring down the rear of their Silverado or Sierra to match a lowered front end or simply level out the factory rake. This kit is engineered to do exactly that—providing a consistent, even stance while maintaining ride quality and full hauling/towing capability.

Key Advantages:

• No Axle Flip Required – Avoids more invasive suspension modifications.

• No Cutting or Welding – All bolt-on installation with factory mounting points.

• Uses Factory Geometry – Maintains proper driveline and suspension angles.

• Durable Hardware – Heavy-duty shackles, spring plates, and U-bolts for long-term strength.

• Versatile Setup – Works for mild stance leveling or full lowering builds.

How It Works

From the factory, your Silverado or Sierra has front spring eye hangers welded to the frame. To achieve a 3-inch drop without disturbing these components, our kit uses rear lowering shackles combined with U-bolts and spring plates. This design allows you to remove the factory spacer block from beneath the leaf springs, creating the extra drop.

Result:

• Removing the factory block = 2-inch drop.

• Adding lowering shackles = additional 1-inch drop.

• Total drop = 3 inches.

Ideal Uses

• Leveling the Truck – If you’ve already lowered the front by 2 inches, this kit gives you the perfect match in the rear.

• Complete Lowering Builds – Pair with a 2 Inch Front Lowering Kit or 3 Inch Front Lowering Kit for a performance stance.

• Show & Street Trucks – Perfect for a cleaner, sportier appearance without sacrificing practicality.

What’s Included in the Kit

1. Rear Lowering Shackles – Heavy-duty steel shackles drop the rear 1 inch.

2. U-Bolts & Spring Plates – Designed to secure the leaf springs without the factory spacer block.

3. Complete Hardware – Grade 8 bolts, washers, and nuts for maximum durability.

4. Installation Instructions – Step-by-step guidance for a straightforward install.

Shocks Sold Separately

Shocks are not included with this kit. For optimal performance and ride quality after lowering, DJM recommends:

Rear Shock 2200 – Sold individually. Order two for a complete rear set.

Vehicle Compatibility

This 3 Inch Rear Lowering Kit fits:

• Chevy Silverado 1500 – 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 

• GMC Sierra 1500 – 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 

• Works with 2WD and some 4WD models (check clearance and block configuration before ordering)

• Compatible with most trim levels including LS, LT, LTZ, SLE, SLT, Z71, and Denali

Why It’s Better Than an Axle Flip Kit

While axle flip kits can give dramatic drops, they’re more complex and often require additional fabrication. This 3 Inch Rear Lowering Kit avoids those challenges:

• Retains OEM Ride Quality – No drastic change to suspension geometry.

• Less Downtime – Install in a few hours without cutting or welding.

• Maintains Ground Clearance – Safer for daily driving over speed bumps and inclines.

Installation Overview

Tools Required:

• Floor jack & jack stands

• Socket & wrench set

• Torque wrench

• Breaker bar

• Safety glasses & gloves

Step-by-Step:

1. Prepare the Vehicle – Park on level ground, set parking brake, and chock front wheels.

2. Lift the Rear – Jack up the frame and support with jack stands.

3. Remove Factory U-Bolts and Spring Plates – Set aside stock hardware.

4. Remove Spacer Block – Take out the factory block from under the leaf springs.

5. Install New Shackles – Position the lowering shackles at the rear spring eye.

6. Install New Spring Plates & U-Bolts – Secure leaf springs without the spacer block.

7. Torque All Hardware – Follow manufacturer torque specs for safety.

8. Lower Vehicle & Test – Verify stance and check for any clearance issues.

Pairing This Kit With Other Suspension Upgrades

For the ultimate lowering setup, pair this rear kit with matching front suspension components:

• 2 Inch Front Lowering Control Arms – For a level stance with this rear kit.

• 3 Inch Front Lowering Kit – For an aggressive, even drop front-to-back.

• DJM Suspension Calmax SuperShocks – Improve control and comfort after lowering.

Maintenance Tips

• Re-Torque Hardware – After 200 miles, check all bolts for proper torque.

• Inspect Shackles Annually – Check for wear in bushings or hardware.

• Wash Road Salt Off Components – Especially in winter climates to prevent corrosion.

Technical Specifications

Why Buy From Gauge Store?

• Over 25 Years of Experience – Trusted in custom truck parts since 1999.

• Fast Shipping – Get your parts quickly.

• Expert Fitment Help – Our team knows Silverado/Sierra suspension inside out.

• Only the Best Parts – We sell components we trust on our own builds.

Order Your 3 Inch Rear Lowering Kit Today

Get the aggressive, leveled stance your 2007–2018 Silverado or Sierra 1500 deserves with this simple, bolt-on 3 Inch Rear Lowering Kit. Combine it with a matching front lowering kit for a complete suspension transformation, or use it alone to eliminate factory rake and achieve a cleaner, more performance-oriented look.