Current Top Sellers
The dual 480C compressor setup builds up to 200 PSI of pressure using only 39.3 amps of power. This means that your system will run strong and last twice as long as systems using a single compressor. With this kind of low amp draw. Your vehicle will make more horsepower when your compressors are running. You'll never have dim headlights or an engine that suffers from performance-robbing high amp draw again.
1 145-175 Pressure Switch
Turns compressor on at pressures less than 145 PSI and shut the compressor off at 175 PSI. 1/8" MNPT.
NOTE: This pressure switch is only recommended for 175psi rated and above compressors.
1 165-200 Pressure Switch
1/8" NPT male port fitting. Tolerance is 5% of specified pressures
* For 12- and 24-Volt systems - up to 20 amps
2 3/8" SMC Water Oil Separator
The 3/8" SMC Water Oil Separator is one of the best investments you can make to keep your system clean.
Specifications Of the Compressors:
Permanent Magnetic Motor
Duty Cycle: 100% @ 100 PSI, 50% @ 200 PSI
Max. Working Pressure: 200 PSI
Amp Draw (Both Units): 39.3 Amps
Min. Ambient Temp: -40 F
Max. Ambient Temp: 158 F
Dimensions (Each): 11.50 L x 4.30 W x 6.50 H
Net Weight (Each): 11.00 lbs.Maximum Total CFM @ 0 PSI: 2.98 CFM
Dual 480C Tank Fill Rates
5 Gallon Tank Fill Rate
|0 to 200psi||5 Min. 2 Sec.|
|165 to 200psi
||1 Min. 15 Sec.|