DJM Suspension 2” Front / 4” Rear Complete Lowering Kit for 2007–2018 Chevy Tahoe

Lowering your 2007–2018 Chevy Tahoe is one of the most impactful upgrades you can make for both style and performance. The DJM Suspension 2-inch front / 4-inch rear lowering kit is specifically engineered for the Tahoe platform, delivering an aggressive, leveled stance without sacrificing ride quality or functionality.

This complete kit uses precision-engineered lowering coil springs in the front and rear, plus a full set of relocation brackets and sway bar end links to maintain proper suspension geometry. Whether you’re going for a street-performance look, easier entry and exit, or a reduced wheel gap for your custom wheels, this kit delivers results while keeping the Tahoe’s smooth ride intact.

Why Choose a 2”/4” Drop for Your Chevy Tahoe?

The factory ride height on the Chevy Tahoe leaves a noticeable rake, with the rear sitting higher than the front. While this is ideal for towing and heavy loads, it’s not the sleek look most enthusiasts are after. The 2-inch front drop and 4-inch rear drop included in this kit will:

• Eliminate excessive rake for a level, aggressive stance

• Lower your Tahoe’s center of gravity for improved cornering and stability

• Reduce wheel gap to show off custom wheels and tires

• Maintain comfort and everyday drivability

• Keep suspension travel in check for long-term reliability

What’s Included in the DJM 2”/4” Lowering Kit?

This kit is designed as a complete solution for lowering your 2007–2018 Tahoe while retaining factory-like ride quality. Here’s what’s included:

Front Suspension – 2-Inch Drop

• 2-Inch Lowering Coil Springs – Replace the factory front strut coil springs with DJM precision-wound springs to achieve a 2-inch drop without compromising ride comfort.
  Shop DJM Front Lowering Springs

Rear Suspension – 4-Inch Drop

• 4-Inch Rear Lowering Coil Springs – High-quality DJM coils designed to lower the rear end while maintaining load capacity and comfort.
  Shop DJM Rear Lowering Springs

• Rear Lower Control Arm Relocation Brackets – Realigns the control arms to the proper angle after lowering, ensuring correct suspension travel and geometry.

• Rear Trailing Arm Brackets – Creates space for the suspension components as they cycle up and down.

• Shorter Rear Sway Bar End-links – Moves the sway bar away from any clearance issues, ensuring smooth operation without binding.

• Rear Shocks - 22.5" Loop/Loop Calmax Super Shocks - Extended – 22.5″  Collapsed – 13.5″

Fitment Compatibility

This kit is engineered specifically for:

• 2007–2018 Chevy Tahoe (2WD & 4WD)

Note: Will not fit models with factory auto-leveling or magnetic ride control without modification.

How the Kit Works

Front Drop (2 Inches)

The Tahoe’s front suspension uses a coil-over strut assembly. This kit lowers the front end by replacing the factory coil spring with DJM’s 2-inch drop coil spring. This change maintains factory shock length, so you can keep your original struts if they’re in good condition.

Rear Drop (4 Inches)

Lowering the rear is more than just installing shorter springs. Dropping 4 inches changes the suspension geometry, which can lead to poor ride quality and accelerated wear if not addressed. That’s why DJM includes:

• Control Arm Relocation Brackets – Restores correct control arm angles to maintain a smooth, stable ride.
• Rear Trailing Arm Brackets – Creates space for the suspension components as they cycle up and down.
• Shorter Sway Bar End-links – Prevents interference between the sway bar and rear suspension components after lowering.

The result is a lowered Tahoe that handles well, rides comfortably, and looks incredible.

Installation Overview

Skill Level: Moderate – Professional recommended for coil spring installation

Tools Needed:

• Jack and jack stands

• Spring compressor (for front coils)

• Standard hand tools (ratchets, wrenches, sockets)

Estimated Install Time:

• DIY: 5–7 hours

• Professional shop: 3–4 hours

Steps in Brief:

1. Safely lift the vehicle and remove the wheels.

2. Remove front strut assemblies, compress springs, and install DJM lowering coils.

3. Remove factory rear coils and replace with DJM 4-inch drop springs.

4. Install control arm relocation brackets.

5. Install shorter sway bar end-links to maintain clearance.

6. Perform a professional alignment to ensure proper tire wear and handling.

Why the DJM 2”/4” Kit is the Best Choice for Tahoe Owners

• Balanced Drop – Creates a level stance that looks aggressive yet refined.

• OEM Ride Quality – Springs and brackets are engineered to work with the Tahoe’s suspension design.

• Durable Construction – Heavy-duty powder-coated components resist corrosion.

• Easy to Upgrade – Works perfectly with DJM drop shocks for even better control.

Why Buy From Gauge-Store?

When you shop at store.gaugemagazine.com, you get more than just parts—you get decades of experience in lowering trucks and SUVs.

• Authorized DJM Suspension Dealer – Genuine parts with full manufacturer warranty.

• Expert Fitment Support – We’ll help you choose the right kit for your needs.

• Fast Shipping – In-stock items ship quickly, so you can start your build sooner.

• Full Inventory – From lowering springs to relocation brackets, we carry it all.

Order Your 2007–2018 Chevy Tahoe 2”/4” Lowering Kit Today

Get the aggressive stance and improved handling you’ve always wanted without sacrificing comfort. This DJM 2-inch front / 4-inch rear lowering kit is the perfect balance for Tahoe owners who want to stand out while keeping their SUV practical for everyday use.

Shop the DJM 2”/4” Tahoe Lowering Kit Now