DJM Suspension 2"/2" Complete Lowering Kit for 2007–2015 Chevy Avalanche, Tahoe & Suburban

(2-Inch Front Drop / 2-Inch Rear Drop)

When GM introduced the modified MacPherson Strut front suspension in 2007 for the Chevy Avalanche, Tahoe, and Suburban, they made a big change—not just for manufacturing, but for enthusiasts who love to customize their ride height. This updated design created new opportunities for aftermarket lowering kits, giving you more options, better fitment, and improved ride quality.

The DJM Suspension 2-inch front and 2-inch rear lowering kit is the perfect solution for owners who want to achieve a mild, leveled stance without sacrificing the comfort, durability, and drivability of their full-size SUV. With this kit, you’ll enjoy a lower center of gravity for improved handling, a sportier profile, and the same smooth ride you love from your factory suspension.

Why Choose a 2"/2" Drop for Your Avalanche, Tahoe, or Suburban?

A lot of owners want to enhance the look and feel of their SUV, but they’re not ready for a drastic drop. The 2"/2" kit gives you just enough lowering to:

• Eliminate excess wheel gap

• Create a cleaner, more aggressive stance

• Improve cornering stability

• Maintain everyday comfort and full suspension travel

The best part? This kit works seamlessly with your factory wheels, tires, and shocks—making it one of the most cost-effective and convenient lowering solutions available.

What’s Included in the DJM 2"/2" Lowering Kit?

This complete kit contains everything you need to drop the front and rear evenly:

• Front Lowering Coil Springs for Strut Assemblies

  • Designed to replace the factory coil on the MacPherson strut for a 2-inch drop.

  • Precision-wound for consistent spring rate and factory-level comfort.

• Rear Lowering Coil Springs

  • Replace your factory rear springs with DJM lowered coils for a 2-inch drop in the rear.

  • Maintain load capacity and ride comfort.

• Rear Shock Extenders – For optimizing your stock shocks at the new ride height.

How the Kit Works with the 2007+ GM MacPherson Strut Front End

Before 2007, lowering a Chevy SUV often required spindle changes or control arm swaps. With the introduction of GM’s modified MacPherson strut system, lowering became simpler and more precise. By changing only the front coil spring on the strut, you can lower your Avalanche, Tahoe, or Suburban without affecting your suspension geometry or steering performance.

Installation Overview

This kit is a direct-fit solution, designed for bolt-on installation without cutting or welding. The front coil swap will require disassembling the strut, so a spring compressor is necessary. The rear coil replacement is straightforward and can be done in under an hour.

Basic Installation Steps:

1. Lift and Support the Vehicle – Use jack stands on a level surface for safety.

2. Remove the Front Struts – Disassemble to swap in the lowering coils.

3. Install DJM Lowering Coils in the Rear – Replace factory coils with 2" drop springs.

4. Add Rear Shock Extenders (optional but recommended) to maintain shock travel.

5. Reinstall Wheels and Torque to Spec – Verify clearance with factory tires/wheels.

6. Perform a Professional Alignment – To ensure proper tire wear and handling.

Recommended Supporting Components

To get the most from your lowering kit and extend the life of your suspension, DJM recommends pairing this kit with:

• Replacement Coil Spring Insulators – Replace worn isolators when swapping coils.

• DJM Rear Drop Shocks – Optional upgrade for enhanced handling and control.

Fitment Compatibility

This DJM lowering kit fits the following models:

• 2007–2015 Chevy Avalanche – 2WD and 4WD

• 2007–2015 Chevy Tahoe – 2WD and 4WD

• 2007–2015 Chevy Suburban – 2WD and 4WD

⚠️ Note: Will not fit models with factory auto-leveling air suspension without modification.

Why Lower Your Avalanche, Tahoe, or Suburban?

These SUVs already offer comfort, space, and presence on the road. Lowering them takes the driving experience to the next level:

• Improved Handling: Lower center of gravity reduces body roll during cornering.

• Better Aesthetics: Eliminates the “floating” look of high factory wheel gaps.

• Easier Loading and Entry: Perfect for families, businesses, or anyone wanting easier cab access.

• Retained Utility: Towing and hauling capabilities remain intact for everyday use.

Why Buy from Gauge-Store?

When you shop at store.gaugemagazine.com, you’re buying from a team with decades of experience in custom suspension. Here’s why customers choose us:

• Authorized DJM Suspension Dealer – 100% genuine products.

• Expert Fitment Support – We’ll help you pick the right parts the first time.

• Fast Shipping – Most orders ship same or next business day.

• Huge Inventory – From lowering kits to shocks, bushings, and control arms, we’ve got it all.

Order Your 2"/2" Lowering Kit Today

If you want a subtle drop that changes your SUV’s look without affecting comfort or performance, DJM’s 2"/2" lowering kit is the perfect choice. Keep your factory wheels, tires, and shocks—just enjoy a better stance and improved handling.

Click below to order now:
2007–2015 Avalanche/Tahoe/Suburban 2"/2" DJM Lowering Kit