Hornblasters
Hornair 2485K Nightmare Edition Onboard Air System
- SKU:
- HA-2485K
- UPC:
- 817562021110
- Weight:
- 30.00 LBS
- Shipping:
- Calculated at Checkout
OVERVIEW-
This kit is not to be underestimated. Despite it being a 2-gallon (7.5 liters) reservoir, the included air pump is a powerhouse. This Viair 485C is the most heavy duty Air Compressor that Viair offers. It’s designed specifically for smaller vehicles where larger tanks may not fit. The compressor is overpowered (200 PSI capable, constant duty, and powerful!) to ensure the best reliability, and only pulls 22 amps at its peak.
An Increasing number of people are using this for more than just blasting horns! With a system like the 2485K, you can also use the air supply to:
- Adjust Tire Pressure
- Moderate Pnuematic Use
- Inflate Water Toys and Safety Gear
- Supply Air to Load Leveling Bags
- Supply Air for a Jake Brake
- Supply Air for Differential Lockers
- Blow up Kids Toys
- And lots more!
Please note that if you use horns, you will still need an air valve kit to connect the system properly.
Unlike some other air systems, HornAir kits come with 10 and 18 gauge wire, and a complete wiring kit including a fuse holder. This takes out the guesswork on your end and helps ensure your system is installed correctly. Another great feature of HornAir systems is that they come with a standard 1/2in OD push-to-pull fitting. This means the horns you hook up with get all the air they need.
RECOMMENDED FOR USE WITH THE FOLLOWING:
Please Note: This HornAir system is not recommended for AirChime horns. We recommend using at least a 4-gallon tank with larger scale train horns like the P3, P5, K3, and K5; however, this kit is perfect for HornBlasters Shocker horns and Outlaw and Bandit series horns.
- Designed For HornBlasters Shocker Horns
- All-inclusive Train Horn Air Solution!
- Top-End 200 PSI Capable Compressor Perfect For Train Horns
- Comes With Standard 1/2" Push-to-Pull Fitting
- Complete Fitting Kit With Safety Valve & Drain Cock
- All Standard Mounting Hardware
- 2 Gallon Air Tank
- Viair 485C Stealth Black Air Compressor
- Viair 110/150 PSI Pressure Switch
- Remote Mountable Intake Filter Assembly
- Air Filter Cartridges
- 6ft ⅜in Air Line (For Intake)
- 17 ft of 10ga & 18ga Gauge Power Wire
- Electric Solenoid Valve
- HornBlasters 200 PSI Air Gauge
- Brass NPT Fittings Kit Including Safety Valve and Blowoff
- Wiring & Plumbing Kit
- Mounting Hardware
- Detailed Instructions
- Earplugs
- Tank: 2 Gallon Tank
- Length: 17" (431.8 mm)
- Diameter: 6" (152.4 mm)
- Height: 7" (177.8 mm)
- Weight: 10 lb (4.54 Kg)
- Compressor: Viair 485c Stealth Black Air Compressor
- Average Fill Time: 1 Min 30 Sec
- Voltage: 12 volts DC
- Air Flow: 2.24 CFM at Free Flow
- Max Amperage: 23 amps
- Maximum Duty Cycle: 100% @ 200 PSI
- Maximum Working Pressure: 200 PSI
- Compressor Length: 10.63″ (270 mm)
- Compressor Width: 4.1″ (104.14 mm)
- Compressor Height: 6.44″ (163.57 mm)
- Pressure Switch: Weatherproof 110/150 PSI Switch
- Voltage: 12 volts DC
- Max Amps: 40A
- Stop Pressure: 150 PSI
- Restart Pressure: 110 PSI
You can trust that your order will be quickly processed and safely delivered.
We ship products across the United States and Canada daily using UPS,
As a courtesy for our clients we do use the following shipping methods when items are shipped direct from the Manufacturers and WD’s FedEx, and the United States Postal Service (USPS).
When you place an order, we estimate delivery dates based upon the availability of your item(s) shipping method selected, and the shipment’s destination
Our shipping charges are determined by the total weight of your order, and are not subject to sales tax.
Unfortunately, some products cannot be shipped to international destinations. Please contact us if you would like to discuss international ordering options.
Not All Orders Ship from Indianapolis, IN.
For the most accurate shipping times please call before placing order!
FOR EXPEDITED SHIPPING CALL US! 317-856-1810
If you have any questions, please give us a call at 317-856-1810
Or contact us by Email By CLICKING HERE
Returns Policy
If you are unsatisfied with your order for any reason, you can return your item(s) in new condition.
for a 15% restocking fee of the price of the part.
Shipping charges will not be refunded
Any return or cancelations using amazon pay will have an additional 6% service charge to cover amazon’s additional fees for refunding orders.
Custom Manufactured Parts:
There are no returns on custom ordered items.
These include, but are not limited to, items such as wheel adapters, wheel tubs and sliding ragtops.
ALL RETURNS MUST BE APPROVED BY OUR MANAGEMENT, WITHIN 30 DAYS OF PURCHASE.
NO ITEMS WILL BE ACCEPTED FOR RETURN WITHOUT AN RA# (RETURN AUTHORIZED NUMBER.)
PLEASE CALL 317-856-1810 TO OBTAIN THIS NUMBER
PLEASE NOTE THERE IS A 15% RESTOCKING FEE ON ALL ITEMS.
SHIPPING CHARGES WILL NOT BE REFUNDED.
OUR MAILING ADDRESS IS:
GAUGE STORE
GAUGE MEDIA GROUP, INC.
6919 S. KENTUCKY AVE.
BUILDING 2
INDIANAPOLIS, IN 46214
Cancellations:
If you wish to cancel an order prior to receiving your items,
you may do so by contacting us by phone at 317-856-1810
Any return or cancelations using amazon pay will have an additional 6% service charge to cover amazon’s additional fees for refunding orders.
There are no cancellations on custom ordered items.
These include, but are not limited to, items such as wheel adapters, wheel tubs and sliding ragtops.
Please note there is a 15% cancellation fee on all cancelled orders to offset processing fees.
Damaged Goods:
All damaged goods must be reported within 3 days of delivery from carrier.
At that time we will contact the carrier and file a shipping damage claim with the carrier.
If you need an immediate replacement you must purchase the item again until the carrier damage claim is resolved.Depending on the outcome of the damage claim you will receive a refund when carriers settle with us.
Clearance Items:
On Clearance Items ALL SALES ARE FINAL
Delivery Confirmation is Delivered Confirmation
When we receive delivery confirmation from the carrier item is considered delivered.
It is the customer responsibility to secure their property and take up any delivery problems with carrier.
Returning Products:
After receiving a RA number.
Get this by calling us at 317-856-1810.
It is customer responsibility to provide additional insurance on their package and provide us with an accurate tracking number.
Refund Method:
After your approved return arrives to our facility and we confirm that all items are in new/ resalable condition.
Your refund will be charged back to your method of payment.
IE. PayPal, Visa, MC, Amex, Discover
This process can take up to 5 business days after receiving the product.
Any return or cancelations using amazon pay will have an additional 6% service charge to cover amazon’s additional fees for refunding orders.
Us at Gauge Store want your shopping experience to be a great experience. Please if you have returns read this page and contact us with any questions.
We strive on customer service and want to continue to earn your business.
317-856-1810
Related Products
Hornblasters
Hornair 232 Onboard Air System
The kit only weighs 19lbs installed and provides 2 gallons of 150 PSI air. The fast-filling 325C air compressor can recharge the tank from 110 to 150 in just 1 Minute and 10 Seconds. The fitting...
Hornblasters
Hornair 244K Nightmare Edition Onboard Air System
OVERVIEW- If you need a workhorse of an onboard air system that can tackle any job you throw at it, look no further than the Horn Air 244K. Not only is the Horn Air 244K great for train horns, but...
Hornblasters
Hornair 544K Nightmare Edition Onboard Air System
OVERVIEW- This kit is not to be underestimated. Despite it being a 5-gallon (18.92 liters) reservoir, the included air pump is a powerhouse. This oversized pump can handle up to 5 gallons of air...
Hornblasters
Hornair 5485 Nightmare Edition Onboard Air System
OVERVIEW- The Onboard Air system for those that won’t settle for anything but the best, The Horn Air 5485K is a powerhouse of performance. Sporting Viair’s most heavy duty compressor, the 5485K is...
